Itc Hemochron Response Whole Blood Coagulation System User Manual

RxDx® Analysis Module Heparin and Protamine Dosing 5WRRNGOGPVVQ*'/1%*410Response9JQNG$NQQF%QCIWNCVKQP5[UVGOOperator’s Manual Englis

10 Selecting a Different Case or Modifying the PID for the Selected Case 1. Display the Patient Info screen: 2. Press 1 to display the screen for en

11 6. Use the numeral keys to enter the patient weight (from 20 to 300 kilograms, or from 44.1 to 666.3 pounds, depending upon the units chosen). If

12 Determining the Bolus Heparin Dose Once the baseline ACT result for a patient is known, the bolus heparin dose can be determined, either by perfor

13 5. Press YES. The information is stored and the Additional Heparin Dose screen is displayed: Note: AddlHep is the calculated additional heparin do

14 6. Press YES. The protamine dose information is stored and the RxDx screen is displayed. If YES is not pressed, the dose will not be stored. Dete

15 Determining Circulating Heparin Level (in mg/kg) Using a HiTT Test Tube When Not in the RxDx Mode Note: Refer to the appropriate test package inser

16 Appending User Notes User Notes can be tagged to a test result to denote additional information. When a note is appended, the numeral corresponding

17 QUALITY CONTROL Routine quality control testing should be part of a comprehensive quality assurance program. Quality control testing of the HEMOCHR

18 RESULTS MANAGEMENT Up to ten (10) RxDx cases can be contained on a HEMOCHRON Response with an activated HEMOCHRON RxDx Analysis Module. Note: If

19 Printing the Test Record, Patient Record, Case List, or Bolus Dose Report 1. Return to the main RxDx menu, and press the PRINT key to display the R

2 INTENDED USE The HEMOCHRON® RxDx® Analysis Module is a supplementary module for the HEMOCHRON Response Whole Blood Coagulation System that provides

20 REPORTS Data from an RxDx case that was run on the HEMOCHRON Response can be retrieved and reported at any time. Seven RxDx reports are available:

21 Displaying and Printing a Report Display and/or print various reports as summarized below: Report Description Patient Record Display the Patient

22

23 INDEX Additional Heparin Dose calculation...4 determination ...

*410

3 PRINCIPLES OF OPERATION Refer to the HEMOCHRON Response Whole Blood Coagulation System Operator's Manual for a complete description of the HEMO

4 Blood Volume Calculation Blood volume can either be directly entered, or it can be calculated from the patient's height and weight. The system

5 Calculation of Heparin Level The heparin level will be calculated automatically whenever a PRT, PDA-O or HiTT test is performed. For the PRT and P

6 ATTENTION LABEL An attention label on the rear of the HEMOCHRON Response instrument alerts users to accompanying documentation: Before using the HE

7 SETTING SUPERVISOR OPTIONS The supervisor can specify default values for heparin units, target ACT, heparin and protamine dose adjustments, and pat

8 Specifying the Default Percentage for Adjusting the Dose The percentage dose adjustment is the factor by which the calculated dose is increased pri

9 OPERATION Entering RxDx The RxDx mode of operation is entered by any of the following: • Selecting RxDx from the ID Selections menu. • Inserting a